Bookmark and Share
 

Dynamini 2 Hose - Adhesive Supply Unit

The Dynamini 2 Hose hot melt adhesive supply unit is a computer-controlled hot-melt supply unit. Its easy-to-use, all-icon control panel is internationally operator friendly.

The Dynamini 2 Hose features ITW Dynatec's patented no-char Melt-On-Demand System.

 
 Overview

DYNAMINI™ hot melt adhesive supply units provide exceptional value in a small hot melt unit which has been designed for optimal performance, reliability and simplified daily operation. The patented melt-on-demand hopper with 7 year warranty standard, virtually eliminates adhesive degradation.

The Dynamini 2 Hose system provides accurate, proportionate temperature control for the hopper, hoses and applicators. Sequential start-up delays may be programmed for turn-on of the hoses and heads.

The temperature control can interlock the parent machine with preselected adhesive temperatures so that production automatically begins when adhesive temperatures are correct for the application. All system temperature values can easily and quickly be programmed.

  • Melt-On-Demand Hopper Grid extends adhesive life and performance
  • 7 year Melt-On-Demand hopper warranty
  • Self-diagnostic P.I.D. Digital Temperature Controller with platinum sensor accuracy
  • 110/120V and 200/240V configurations fitted with either a piston or gear pump
  • Easily removable access covers completely expose all components for easy maintenance
 
 The Dynatec Difference

Melt-on-Demand Hopper
Most suppliers will agree that adhesive degradation is the number one cause of downtime on hot melt equipment. To address this problem, ITW Dynatec has patented a “Melt-on-Demand” system. ITW Dynatec’s vertical, unheated hoppers only melt the amount of adhesive required by the application. Most of the hot melt adhesive in the hopper remains at a much lower temperature, perhaps even solid state.

The added benefits of melting only the adhesive required are quicker start-ups, reduced energy costs, better viscosity control, and reduced fumes.

Melt-On-Demand Hopper:

  • Less Energy Consumption – The Dynamelt uses less energy than conventional equipment by heating only the adhesive in the lower portion of the hopper. There is no need to waste energy and manufacturing time melting/maintaining the entire contents of the hopper.
  • Operator Safety – The adhesive in the top of the hopper remains in a cooler, often solid state and reduces the operator’s potential for burns. Also, adhesive splash-back when filling the hopper is reduced.
  • Faster System-Ready – The Dynamini Series does not have to melt all of the adhesive, so it is ready for operation much faster than conventional equipment.
  • Adhesive Degradation is Greatly Reduced –By only melting the required amount of adhesive, the common problem of charring is minimized. When adhesive is replenished using conventional equipment, the solid, more dense adhesive falls to the bottom of the hopper causing older glue to move to the top of the hopper. By doing this, adhesive is subject to longer heat exposure which is one of the main causes of char. This does not happen with Melt-On-Demand. The molten glue at the bottom of the hopper is used first. Another important benefit is that all of the heat is applied at the bottom of the hopper using Melt-On-Demand, so char build-up on the side walls of the hopper is minimized.
  • Reduced Maintenance – With Melt-On-Demand, equipment maintenance will be reduced. Frequency of Periodic hopper draining to purge char is greatly reduced, and filter and nozzle clogging will be reduced as well.
  • Seven-Year Hopper Warranty
 
*Melt and pump rates dependant on adhesive type
System N05 N10
Hopper Capacity 5kg (10lbs) 9kg (20lbs)
Operating Temperature 40 to 218°C (100 to 425°F) 40 to 218°C (100 to 425°F)
Melt Rate (per hour)* 8 kg/hr (17.3lb/hr) 8 kg/hr (17.3lb/hr)
Pump Rate (per hour)* .91 kg/min (2lb/min) .91 kg/min (2lb/min)
Piston Pump Compression Ratios 12:1 12:1
Gear Pump 1.5, 3.2, 4.5, 5.5, & 10cc 1.5, 3.2, 4.5, 5.5, & 10cc
Hose Output Zones 2 2
Max Working Hydraulic Pressure 6.8 MPa (1000psi) - Piston Pump 6.8 MPa (1000psi) - Piston Pump
Temperature Control Stability ± 1°C (1°F) ± 1°C (1°F)
Electrical Service Standard 100 to 120 VAC 1Phase 50/60 Hz 100 to 120 VAC 1Phase 50/60 Hz
Electrical Service Standard - -
Working Viscosity 500 - 50,000cps 500 - 50,000cps
 
Dimensions N05 N10
Height (H) 45 cm (17.75 in) 65.4cm (25.75 in)
Depth (D) 54 cm (21.25 in) 54 cm (21.25 in)
Width (W) 29 cm (11.38 in) 29 cm (11.38 in)
Weight (empty) 27 kg (60lbs) 34 kg (76lbs)
 
Optional Accessories
Analog pressure gauge
Hose boom
Roll cart
Swirl kit
 
Click here to request a quote on hot melt machinery from ITW Dynatec.

Facebook   Twitter   Youtube   Linked In

ITW Dynatec | 31 Volunteer Drive | Hendersonville, TN 37075 | Phone: 615.824.3634 | info@itwdynatec.com