Bookmark and Share
 

DGII™ - Hand Applicator - Manual Adhesive Applicator

The DGII is designed for flexibility connecting to the adhesive supply hose through either a ball swivel fitting or an axial rotation (rotary) fitting.

 
 Overview
The DGII is designed for flexibility connecting to the adhesive supply hose through either a ball swivel fitting or an axial rotation (rotary) fitting. Adhesive output may be oriented for straight or right angle application with a variety of bead and spiral spray nozzles available. The DGII applicator can be fitted for a two- or four-fingered trigger and set up for bottom-entry or top-entry hose connection.
 
 Features
  • Rotary or ball swivel with top or bottom hose connection.
  • Ergonomic handle with a clear sight line to the nozzle tip.
  • Easy to change cartridge-style heater and sensor
  • Two or four finger trigger with built-in trigger lock.
  • Straight or right angle nozzle adapter.
  • Bead or swirl applications.
 Common Configurations

Four Finger Trigger Hand Applicator

Two Finger Trigger

Rotary Swivel Configuration

Ball Swivel Configuration

   

Spiral spray nozzle hot melt hand applicator

Right angle hot melt hand applicator

Spiral Spray Nozzle

Right Angle Bead Nozzle

 
System DGII Hand-Held Applicator
CE Mark Yes
Temperature Range 38° C - 232° C (100° F - 450° F)
Maximum Operator Pressure 7 MPa (1,000 psi)
Working Viscosity 0 - 80,000 cps
Flow Rate .39 kg/min (.9 lb/min)
Voltage/Power Requirements 120 or 240 VAC 50/60 Hz
Solenoid Pressure Range (for swirl application only) .48 - .96 MPa (70 - 140 psi)
Spray Air Pressure Range (for swirl application only) 0 to .55 MPa (0 to 80 psi)

Dimensions DGII
Height (H) 22.2 cm (8.74 in)
Depth (D) 22.5 cm (8.46 in)
Width (W) 4.2 cm (1.65 in)
Weight (empty) .77 kg (1.7 lbs)
 
Click here to request a quote on hot melt machinery from ITW Dynatec.

Facebook   Twitter   Youtube   Linked In

ITW Dynatec | 31 Volunteer Drive | Hendersonville, TN 37075 | Phone: 615.824.3634 | info@itwdynatec.com