Currently supported languages: English

 Quick Links     Minimize
Quick Links
    - Adhesive Delivery Systems
    - Adhesive Supply Units
    - Adhesive Drum Melters
    - Auto Adhesive Applicators
    - Manual Adhesive Applicators
        - DGII™ Hand Applicator
    - Adhesive Hoses
    - Cold Glue Systems
    - Pattern Controllers

Manual Adhesive Applicators

Manual adhesive applicators from ITW Dynatec® have been designed with flexibility in mind for every low volume application. For manual hot melt applications, you need an applicator that won't slow you down, and with the flexibility of our manual adhesive applicators, you can have a hot melt applicator that easily keeps up with your workflow.



 DGII™ Adhesive Applicator

The DGII™ manual hot melt adhesive applicator from ITW Dynatec®

Quick Specs

  • Rotary or ball swivel with top or bottom hose connections. 
  • Easy-to-change cartridge style heater and sensor.
  • Straight or right angle nozzle adapters.
  • Bead or swirl applications.

Click to learn more about the DGII™ adhesive hand applicator from ITW Dynatec®



Stitch Adhesive Savings Brochure - Save up to 50% Adhesive (.PDF)

Each Mod-Plus BF applicator features one or more adhesive valve modules mounted to a single service block, simplifying spare parts inventories.

Each module operates with air pressure opening and closing the orifice. Air open/air close functionality reduces stringing and gives a clean, sharp cutoff every time throughout the life of the head, unlike spring-operated applicators which cause more stringing as the spring wears and loses tension. Oh, did we mention the air open/air close functionality is standard?

In addition, the mounting brackets for the Mod-Plus applicators can be placed on the top or back, allowing for more versatile installation options. High performance seals (which are also standard) improve applicator life, while the platinum sensor allows for better temperature control over conventional temperature control sensors.


 BF ModPlus Optima

CE Mark Yes
Mounting 1/2" rod mount
Construction Material Anodized AI./Stainless Steel
Temperature Range Rate38°C - 218°C (100°F - 425°F)
Cycle Rate Up to 5,000 cycles per/min*
Adhesive Pressure 68 bar max. (1000psi)
Air Pressure Range  4.8 - 9.5 bar (70-140 psi)
Supply Voltage  120 or 240 VAC 1 Phase 50/60 Hz

*Maximum cycle rate vary depending upon head configuration and application specifics.


Need more information on our products?  Send an email to requesting more information about a specific product(s) and/or service, or use the contact/quote form

Click here to request a quote on hot melt machinery from ITW Dynatec.

Facebook   Twitter   Youtube   Linked In

ITW Dynatec | 31 Volunteer Drive | Hendersonville, TN 37075 | Phone: 615.824.3634 |