Adhesive Controllers
The Pattern Controller is one component of an adhesive application system consisting of a hot-melt unit, cold glue pressure vessel or cold glue pump, adhesive hoses and applicator heads. The controller can be used for hot-melt or cold glue application. The pattern controller activates solenoids for the applicator heads in order to create individual adhesive patterns. Click on the links below to learn more about the full line of ITW Dynatec Hot Melt Pattern Controllers.
 
  
   | Dynacontrol V6 - Modular Control Platform 
   Quick Specs   
    
    Modular based, plug-and-play controls 
    Remote access capability 
    Independent standardized field bus interface
    Communication interfaces include: EtherNet/IP, Profibus, EtherCat, ModBus/TCP |  |  DY2002 Distance - Based  Pattern Controller
 
 Quick Specs 
    
    2 Channels
    4 Patterns per channel
    Memory for 12 programs
    Distance-based, time-based and driver modes
    Integrated palletization mode
    Built-in production counters
    Machine speeds to 600m/min (200fpm) @ 0.5mm (.02") | 
  
   |  |  | 
 | 
  
   |  EVC-1 Volume-Based Controller
 
 QuickSpecs 
    
    Compatible with most new & existing ITW Dynatec equipment
    Smart electronics work with both 120/240 VAC power input without changing internal circuitry
    Fine tuning of adhesive output throughout a full range of line speeds
    Smart electronics accept 0-10vdc or 4-20ma input signals |  |  | 
  
   |  |  |   |