DGII™ - Hand-Held Adhesive Applicator
ITW Dynatec’s DynaGun DGII manual applicator is designed for flexibly connecting to the adhesive supply hose through either a ball swivel fitting or an axial rotation (rotary) fitting.
Overview
- Adhesive output may be oriented for straight or right angle application with a variety of bead and spiral spray nozzles available.
- The DGII applicator can be fitted for a two- or four-fingered trigger and set up for bottom-entry or top-entry hose connection.
Downloads
Features
- Rotary or ball swivel with top or bottom hose connection.
- Ergonomic handle with a clear sight line to the nozzle tip.
- Easy to change cartridge-style heater and sensor.
- Two or four finger trigger with built-in trigger lock.
- Straight or right angle nozzle adapter.
- Bead or swirl applications.
Technical Data
| System | DGII Hand-Held Applicator |
|---|---|
| CE Mark | Yes |
| Temperature Range | 38° C – 232° C (100° F – 450° F) |
| Maximum Operator Pressure | 7 MPa (1,000 psi) |
| Working Viscosity | 0 – 80,000 cps |
| Flow Rate | .39 kg/min (.9 lb/min) |
| Voltage/Power Requirements | 120 or 240 VAC 50/60 Hz |
| Solenoid Pressure Range (for swirl application only) | .48 – .96 MPa (70 – 140 psi) |
| Spray Air Pressure Range (for swirl application only) | 0 to .55 MPa (0 to 80 psi) |
| Dimensions | DGII |
|---|---|
| Height (H) | 22.2 cm (8.74 in) |
| Depth (D) | 22.5 cm (8.46 in) |
| Width (W) | 4.2 cm (1.65 in) |
| Weight (empty) | .77 kg (1.7 lbs) |
Additional Information
Rotary Swivel Configuration
Ball Swivel Configuration
Spiral Spray Nozzle
Right Angle Bead Nozzle