ITW Dynatec Hot Melt Adhesive Feeder

Experienced in
meeting the needs of
hot melt applications
for 40 years.

ITW Dynatec Hot Melt Adhesive Feeder HF2

Automatic "On-Demand" filling of the hot melt unit
Removes an operator from the hot melt supply unit area
Nozzle plugging and system contamination is virtually eliminated
Less thermal shock to the hot melt system

Adhesive Feeder Product Literature Downloads:

Fast Brochure Download (PDF)

High Res Brochure Download

H-2 Hot Melt Adhesive Feeder Service and Operating Manual

Hot melt adhesive supply units (ASUs) require frequent adhesive re-filling.

If the operator does not refill the ASU often enough, there can be insufficient time to melt and condition the adhesive. this results in equipment down time and employees waiting untill the hopper temperature returns to setpoint.

Installation of a HF Hopper feeder system reduces all of the above problems. The result is lower repair costs and higher production rates.

The HF-2 Hopper Feeder utilizes an air venturi-activated suction to pick up the solid "chicklet" or ball form of hot melt adhesive from a bulk container (such as a 32-gallon plastic drum or a 250-gallon tote) and convey it by air pressure to the hopper.