ADS1 DynaFill™ Adhesive Delivery System

Experienced in
meeting the needs of
hot melt applications
for 40 years.

ADS1 DynaFill™ Adhesive Delivery System

The ADS1 DynaFill™ automatically replenishes adhesive to the desired level in hot melt equipment. A low level indicator sends a signal to the DynaFill™ that adhesive is needed. The DynaFill™ then activates a positive pressure suction that draws the adhesive and deposits it into the hot melt unit. ADS1 DynaFill™Press Release

The ADS1 will easily integrate with competitive equipment configurations.
Please contact Dynatec for more information and pricing.

Automatic "On-Demand" filling of the hot melt unit
Removes an operator from the hot melt supply unit area
Nozzle plugging and system contamination is virtually eliminated
Less thermal shock to the hot melt system

ITW Dynatec Hot Melt Adhesive Feeder ADS1 DynaFill Hot Melt Adhesive Feed System

Adhesive Feeder Product Literature Downloads:

Brochure Download

ADS1 Hot Melt Adhesive Feeder Service and Operating Manual

Hot melt adhesive supply units (ASUs) require frequent adhesive re-filling.

If the operator does not refill the hot melt supply unit often enough, there can be insufficient time to melt and condition the adhesive. this results in equipment down time and employees waiting untill the hopper temperature returns to setpoint.

Installation of a HF Hopper feeder system reduces all of the above problems. The result is lower repair costs and higher production rates.

The ADS-1 DynaFill™ utilizes an air venturi-activated suction to pick up the solid hot melt adhesive from a bulk container and convey it by air pressure to the hopper.