The ITW Dynatec Cold Glue application machines are used by companies across the globe to apply cold glue to their products and packages. Click below to learn more about the full line of cold glue applicator systems from ITW Dyantec.

DynaCold High Speed Quick Specs Two millisecond cycle time Robust ball and seat design along with the elimination of dynamic seals result in minimized wear and extended life Stainless steel construction and proven modular components Adhesive application pressures to 600 psi (40 bar) with fluid viscosities to 6000 centipoise	DynaCold Mini Quick Specs The Dynacold Mini cold glue applicator system is a smaller, lighter-weight version of our successful Dynacold Series high-speed electric valves. The "Mini" retains all the capabilities of its larger sibling while providing more flexible installation options.	DH-12 Contact Quick Specs 24VDC Pneumatic Solenoid Viscosities to 1,000cps Fluid Pressures to 100psi Cycle Speed = 20ms


CV-16/UNI C Applicator Quick Specs Zero Cavity Nozzle 0.3 to 1.5mm Orifices Viscocities to 2,500cps (CV-16) 6,000cps (UNI C) 24VDC, 115VAC or 230VAC Solenoids Fluid Pressures to 400psi Cycle Speed = 50ms Long and Short Nozzle Versions	CS-22 Pneumatic Spray Quick Specs Cone or Fan Caps 0.3 to 1.5mm Orifices 24VDC, 115VAC or 230VAC Solenoids AZuto Atomizing Air Shutoff Fluid Pressures to 400psi Cycle Speed = 60ms	Fluid Delivery System Quick Specs Pre-Assembled 1:1 Diaphragm Pump/Filter/Fluid Regulator 2:1 Fluid Delivery System Built-In By-Pass Fluid Pressure Regulation via Air Pilot Stainless Steel and Inert Plastics Wetted Parts

Cold Glue Systems

DynaCold High Speed Quick Specs Two millisecond cycle time Robust ball and seat design along with the elimination of dynamic seals result in minimized wear and extended life Stainless steel construction and proven modular components Adhesive application pressures to 600 psi (40 bar) with fluid viscosities to 6000 centipoise	DynaCold Mini Quick Specs The Dynacold Mini cold glue applicator system is a smaller, lighter-weight version of our successful Dynacold Series high-speed electric valves. The "Mini" retains all the capabilities of its larger sibling while providing more flexible installation options.	DH-12 Contact Quick Specs 24VDC Pneumatic Solenoid Viscosities to 1,000cps Fluid Pressures to 100psi Cycle Speed = 20ms


CV-16/UNI C Applicator Quick Specs Zero Cavity Nozzle 0.3 to 1.5mm Orifices Viscocities to 2,500cps (CV-16) 6,000cps (UNI C) 24VDC, 115VAC or 230VAC Solenoids Fluid Pressures to 400psi Cycle Speed = 50ms Long and Short Nozzle Versions	CS-22 Pneumatic Spray Quick Specs Cone or Fan Caps 0.3 to 1.5mm Orifices 24VDC, 115VAC or 230VAC Solenoids AZuto Atomizing Air Shutoff Fluid Pressures to 400psi Cycle Speed = 60ms	Fluid Delivery System Quick Specs Pre-Assembled 1:1 Diaphragm Pump/Filter/Fluid Regulator 2:1 Fluid Delivery System Built-In By-Pass Fluid Pressure Regulation via Air Pilot Stainless Steel and Inert Plastics Wetted Parts

Need more information on our products? Send an email to info@itwdynatec.com requesting more information about a specific product(s) and/or service, or use the contact/quote form.

ITW Dynatec
31 Volunteer Drive
Hendersonville, TN 37075
Phone: 615.824.3634
Fax: 615.264.5248