Bookmark and Share
 

Dynamelt™ GC Series (3160) - Adhesive Supply Unit

The Dynamelt™ GC Series (3160) adhesive supply unit is the largest capacity melter in the ITW Dynatec family, offering maximum adhesive output. Two critical factors in choosing the right ASU for your operation are melt rate and pump rate and ITW Dynatec has maximized both in the GC Series for optimum performance. The GC Series melter can also accommodate a large variety of pump sizes and configurations, offering even greater flexibility.

 Overview
  • Max pump output rate up to 1400 lbs/hr for ultimate performance.
  • Teflon impregnated anodized hopper.
  • Built-in safety systems to prevent charring.
  • Multiple grid rows for superior melt rate.
  • Multiple temperature control zones.
 The Dynatec Difference

High Volume Melt Rate
The net output of any adhesive supply unit’s melting capacity is based on two factors - square inches of surface area in conjunction with wattage. ITW Dynatec has the highest number of square inches, in relationship to wattage, of any melter in it’s class - giving you the superior performance you require. In addition, ITW Dynatec’s patented Melt-On-Demand system utilizes vertical, unheated hoppers that only melt the amount of adhesive required by the application. Most of the adhesive in the hopper remains at a much lower temperature, perhaps even solid state. The added benefits of melting only the adhesive required are faster start-ups, lower energy costs, better viscosity control, and reduced fumes.

ITW Dynatec also offers hot melt adhesive feeders to automatically transfer dry, pelletized hot melt adhesive from a bulk container to the adhesive supply unit.  For more information click here


*Melt and pump rates dependant on adhesive type
System GC3160
Hopper Capacity 1600 lbs (680 kg)
Operating Temperature 200º to 450º F (93º to 232º C)
Melt Rate (per hour)* 1400 lb/hr (635 kg/hr)
Control Scheme Allen-Bradley ControlLogix® w/ Panelview
1000+ Color HMI
Number of Pumps 1 - 4
Available Pump Sizes** Each pump up to 93cc (1850 lbs/hr)
Pump Pressure Relief Normal range 0 to 1,000 psi (0 to 70 bar)
Electrical Requirements 240 VAC, 50/60 Hz, 3 ph, 120 amp
130,000+ watts heating
 
Dimensions GC3160
Height (H) 271 cm (106.5 in)
Depth (D) 203 cm (80 in)
Width (W) 187 cm (73.75 in)

*Melt rates vary with adhesive type and form.
**May vary with specific gravity.

 
Click here to request a quote on hot melt machinery from ITW Dynatec.

Facebook   Twitter   Youtube   Linked In

ITW Dynatec | 31 Volunteer Drive | Hendersonville, TN 37075 | Phone: 615.824.3634 | info@itwdynatec.com