QUATTRO™ The ITW Challenger Quattro Melter adhesive supply unit (ASU) is a computer-controlled hot melt supply unit designed on metric standards. Its "all icon" control panel is internationally operator friendly. The Quattro ASU uses a microprocessor temperature control to closely control the temperature of hot melt adhesive for a tank and up to four hoses and four heads. Temperature setpoints are operator selected for up to nine zones and the system automatically provides warnings for operator errors and system malfunctions.
The ASU uses an extremely dependable, constant-pressure piston pump. The air operated pump insures a high pressure adhesive output from a low pressure, compressed air input.
• Microprocessor temperature control closely monitors temperature of hot melt tank and hoses
• Simple, user friendly icon-driven controls
• Easy drop-in replacement for Nordson® melters
• Temperature stand-by settings to help reduce adhesive char when unit is inactive
• Easily removable access covers completely expose all components for easy maintenance
*Note: Nordson® is a registered trademark of Nordson Corporation. ProBlue® is a registered trademark of Nordson Corporation.
| System |
Quattro™
|
|
Hopper Capacity
|
8.5kg (18.7lbs)
|
|
Operating Temperature
|
40°C to 218°C (100°F to 425°F)
|
|
Melt Rate (per hour)*
|
9.1 kg/hr (20 lb/hr)
|
|
Pump Rate
|
.87 kg/min (1.92 lb/min)
|
|
Piston Pump Compression Ratios
|
14:1
|
|
Hose Output Zones
|
4
|
|
Maximum Working Hydraulic Pressure
|
9.7 MPa (1400psi) - Piston Pump
|
|
Temperature Control Stability
|
±1°C (±1°F)
|
|
Electrical Service Standard
|
200-240 VAC 1-3ph 50/60 Hz
|
|
Electrical Service Standard
|
380 VAC 3Phase wye 50/60 Hz
|
|
Working Viscosity
|
500-30,000 cps
|
|
Dimensions
|
Quattro™
|
Quattro™ Mounting Dimensions
|
| Height (H) |
51 cm (20 in)
|
(A) 5 cm (2 in)
|
| Depth (D) |
58 cm (22.8 in)
|
(B) 38 cm (15 in)
|
| Width (W) |
34.3 cm (13.5 in)
|
(C) 25 cm (9.8 in)
|
| Weight (empty) |
39 kg (86 lbs)
|
-
|
Have a lost or damaged manual? Download a digital one from the ITW Dynatec downloads page*.
*NOTE: You must be logged in to access the downloads page. All digital manuals are in .pdf format.
Quattro Melter - The Dynatec Difference
- Computer-controlled hot melt supply unit designed on metric standards
- Flexible temperature programming features help increase adhesive life
- Extremely dependable piston pump
- Teflon coated tank accepts hot melt adhesive in all popular forms including pellets, slugs and blocks.