Choose Your Spray Applicator Comparison Chart - Adhesive Applicators
 

0 to 2.7  bar
(0 to 4 psi)
 
Spray Applicator UFD Fiberized Spray UFD Equity Fiberized Spray UFD High-Speed Fiberized Spray DeltaFx
Fiberized Spray
High-Speed Strand Coating
High-Speed Fiberized Spray Vector Metered Spray Adapter
 
         
Max. No. of Modules 6-14 1-6 1-6 1 1 - 8  1 - 8
40
Spacing Between Nozzle Centers 25.2 mm 25.2 mm 25.2 mm N/A 25 - 25.2 mm  25 - 25.2 mm
25 mm
Temperature Range 38°C to 218°C (100°F to 425°F) 38°C to 218°C (100°F to 425°F) 38°C to 218°C (100°F to 425°F) 38°C to 218°C (100°F to 425°F) 25°C to 200°C (77°F to 392°F)  25°C to 200°C (77°F to 392°F)
38°C to 218°C (100°F to 425°F)
Warm-up Time 30 min. (cold start) 5 min. (module change) 30 min. (cold start) 5 min. (module change) 30 min. (cold start) 5 min. (module change) 15 min. (cold start) 15 min. for cold start, 5 min. for module change  15 min. for cold start, 5 min. for module change
45 min. (cold start) 10 min. (module change)
Adhesive Viscosity 100 to 30,000 cps* 100 to 30,000 cps* 100 to 30,000 cps* Lab Test Required 100 to 30,000 mPas cps* 100 to 30,000 mPas cps*
100 to 30,000 cps*
Max. Adhesive Pressure 68 bar (1,000 psi) 68 bar (1,000 psi) 68 bar (1,000 psi) 68 bar (1,000 psi) 68 bar (1,000 psi) 68 bar (1,000 psi) 68 bar (1,000 psi)
Process Air Pressure Range 0 to 2.7  bar
(0 to 40 psi)
0 to 2.7  bar
(0 to 40 psi)
0 to 2.7  bar
(0 to 40 psi)
0.8 to 1.5 bar
(12 to 22 psi)
 0 to 1.7 bar
(0 to 25 psi)
1 to 4 bar
(15 to 58 psi)
0 to 2.7 bar
(0 to 40 psi)
Supply Voltage 200-240 VAC 1 Phase 50-60Hz 200-240 VAC 1 Phase 50-60Hz 200-240 VAC 1 Phase 50-60Hz 200-240 VAC 1 Phase 50-60Hz 200-240 VAC 1 Phase 50-60Hz  200-240 VAC 1 Phase 50-60Hz
200-240 VAC 1 Phase 50-60Hz
Dimensions (HxDxW) 261 x 146.3 x 50mm
(10.28 x 5.76 x 1.97 in)
269 x 222 x 151-350 mm (9.31 x 8.74 x 5.95 in) 133.5 x 222 x 151 -350 mm (5.25 x 8.51 x 1.97 - 5.91 in) 261 x 146.3 x 50mm
(10.28 x 5.76 x 1.97 in)
146 x 235 x 50-200mm
(5.75 x 9.26 x 1.97-7.87 in)
 146 x 235 x 50-200mm
(5.75 x 9.26 x 1.97-7.87 in)
261 x 146.3 x 50mm
(10.28 x 5.76 x 1.97 in)

 Note: All above information is dependent on line speed operation and type of adhesive, some results may vary.
* Adhesive Dependent

 
Click here to request a quote on hot melt machinery from ITW Dynatec.

Facebook   Twitter   Youtube   Linked In

ITW Dynatec | 31 Volunteer Drive | Hendersonville, TN 37075 | Phone: 615.824.3634 | info@itwdynatec.com