ITW Dynatec DG II Hot Melt Hand Applicator

The Rotary Swivel Configuration- The ROTARY SWIVEL is useful when the hot melt hose is connected at the bottom of the hand applicator. The movement of the applicator can control the hose position. The Ball Swivel Configuration- The BALL SWIVEL is useful when the hot melt hose is connected at the top of the hand applicator and the applicator is suspended from the hose or a tool balancer. The Spiral Spray Nozzle Configuration- A variety of bead and spiral spray nozzles are available for applications that are straight or at a right angle to the trigger. The Right Angle Bead Nozzle configuration- Right angle bead nozzle

Dynatec DG II Hot-Melt Hand Applicator and Dynamini Configured System Literature Downloads: DG II Hot-Melt Hand Applicator Fast Brochure Download (PDF) DG II Hot-Melt Hand Applicator High Res Brochure Download (PDF) DYNAMINI / DG II Configured System Fast Brochure Download (PDF) DYNAMINI / DG II Configured System High Res Brochure Download (PDF) DG II Handgun Service and Operating Manual: DGII Manual English DGII Manual Spanish

Dynamini /DGII Hand Applicator Configured System

CONFIGURED SYSTEM CONSISTS OF:

• Dynamini TM Adhesive Supply Unit
• Hot-Melt Adhesive Hose
• DG II TM Hand Applicator
• Bead Nozzle for the BeadDG II TM or
• Swirl Adapter, Nozzle and Cap for the SwirlDG II TM
• Swirl Air Kit for the SwirlDG II TM

The DG II Hot Melt Hand Applicator Features:

• Rotary swivel or ball swivel with top or bottom hose connection
• Ergonomic handle with a clear sight line to the nozzle tip
• Easy to change cartridge-style heater and sensor
• Two or four finger trigger with built-in trigger lock

DG II Hand Gun Specifications:

• Electrical -
  80 Watts at 120 or 240 VAC 1 Ph 50/60 Hz
• Maximum Temp -
  450 F (232 C)
• Maximum Adhesive Pressure -
  1000 psi (70 bar)
• Maximum Adhesive Viscosity -
  80,000 cp

THE CONFIGURED SYSTEM PROVIDES FLEXIBILITY AND ALLOWS for the use of a variety of bead and spiral spray nozzles that are available for applications that are straight or at a right angles to the trigger.

Note- The Image Shown To The Right Features An Optional Cart, Boom Assembly, Tool Balancer and Hose Cradle.